ASTM F1921 ASTM F2029 Packaging Material Hot Tack Tester Heat Seal Tester
|
...ASTM F2029 and other standards. This advanced testing equipment performs multiple test types including hot tack testing, heat seal testing, heat seal strength testing, and tensile testing. Traditional heat seal testing involves ......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
UP-5018 Hot Tack Tester with Touchscreen Interface ±1ºC Temperature Control Accuracy and Safety Features for Plastic Film Sealing
|
...Hot Tack Tester With Touchscreen Interface and Safety Features Introduction The heat sealing tester is designed to measure critical parameters including heat sealing temperature, time, and pressure for plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite materials. This instrument provides accurate heat sealing test indices through hot......
Dongguan Youbi Test Equipment Co.,Ltd
|
ASTM F1921 Flexible Package Hot Tack Testing Machine with PLC Control
|
... surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack tester is especially important for vertical form-fill-seal packaging. Features: Hot tack, heat seal, peeling and tensile test items are integrated in...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
PSTC - 16 Initial Adhesion Computer 100N Loop Tack Tester Adhesion Testing Equipment
|
Computer Type Loop Tack Tester / Tape Adhesion Tester / Initial Adhesion / PSTC - 16 Standard FINAT(FINAT test method No. 9: loop tack measurement), PSTC-16(Loop tack), ASTM D6195-03(Standard test methods for loop tack), GB/T31125-2014(Test method for ......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Tack Tape Primary Computer Control Loop Tack Tester Less Than 1% Error
|
Tack Tape Primary Computer Control Loop Tack Tester Less Than 1% Error Introduction: It is used to do the loop tack test of kinds of adhesive,tape,can meet FINAT (FINAT Test Method No. 9:measurement), ASTM D6195, PSTC 16 test standards. Work Theory: The loop tack specimen with touch with standard glass plate with constant speed 300mm/min,then the loop tack......
Dongguan Liyi Environmental Technology Co., Ltd.
|
CNS11888 100mm Rolling Ball Tack Tester For Adhesive Tape
|
...Tack Tester Rolling Ball CNS11888 Adhesion Test Definition of primary tack : Initial Tack: the adhesion of the adhesive tape to an object when the adhesive surface is temporarily contacted with minute pressure between the object and the pressure-sensitive adhesive tape. Introduction: PT-6030 tape initial tack tester is an instrument for testing the initial tack......
Perfect International Instruments Co., Ltd
|
PSTC 6 Rolling Ball Tack Tester Tape Initial Adhesion Testing Machine Film Testing Equipment Film Testing Equipment Film
|
... 1. Test principle PSTC 6 Rolling Ball Tack Tester adopted the inclined plane rolling ball method and the inclined groove rolling ball method of method B: Method A: the adhesion of the adhesive ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
BN-IV-50T Digital Ink Viscosity Tack Tester Automatic Inkometer
|
BN-IV-50T Digital display Ink viscosity meter (Automatic inkometer, ink tack tester) mainly adopts the highest configuration of modern intelligent industrial control: PLC+touch screen+servo motor, which can clearly and accurately display the instantaneous ......
Wuhan Bonnin Technology Ltd.
|
IEC68 120mm Adhesion Tape Rolling Ball Tack Tester
|
Professional Adhesion Tape Rolling Ball Method Initial Tack Ball Test Instrument Product use: Using the inclined ball method, when the short contact between the steel ball and the adhesive surface of the test specimen occurs with a slight pressure, the ......
Guangdong Aisry Instrument Technology Co., Ltd.
|
High-precision Flammability Testing Equipment For Hot Wire Tester Complies With International Standard IEC 60695-2-12 Luminescent Filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr)
|
...hot wire tester complies with the international standard IEC 60695-2-12 Luminescent filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr) Standard of Glow Wire Tester: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|