| Categories | ABB PLC |
|---|---|
| Packaging: | Original new packaging |
| Model Number: | IMASO11 |
| Supply Ability: | in stock |
| Price: | 66USD |
| Packaging Details: | Brand new and original |
| Payment Terms: | T/T |
| Delivery Time: | 2-3 work days |
| Place of shipment: | Xiamen,China |
| Brand Name: | ABB |
| Quotation Time: | Quick Quote Within 24 Hours |
| Place of Origin: | SWEDEN |
| Condition: | 100% Original |
| MOQ: | 1 |
ABB Bailey IMASO11 is an Analog Output (ASO) module for the INFI 90 OPEN Strategic Process Management System. It interfaces control modules with process field devices and is used by multifunction processor (MFP) or multifunction controller (MFC) modules to control process outputs. The module uses closed-loop output circuits with signal readback for output monitoring.
| Product type | Analog Output Module (ASO) |
| System | INFI 90 OPEN |
| Analog outputs | 14 |
| Output signals | 1-5 VDC or 4-20 mA |
| D/A resolution | 10 bits |
| Output accuracy | ≤0.15% in voltage mode; ≤0.25% in current mode |
| Output load | 750 Ω maximum in current mode; 22 kΩ minimum in voltage mode |
| Current limiting / short-circuit protection | 50 mA nominal output current limit |
| Output overvoltage category | Category III |
| Power requirements | +5 VDC ±5%, +15 VDC ±5%, −15 VDC ±5%, and +24 VDC ±10% from the termination unit/module |
| Typical current consumption | 250 mA at +5 VDC; 100 mA at +15 VDC; 90 mA at −15 VDC; 310 mA at +24 VDC |
| Typical power dissipation | 1.5 W at +5 VDC; 2 W at +15 VDC; 1.75 W at −15 VDC; 8 W at 24 VDC |
| Power overvoltage category | Category I |
| Mounting | One slot in a standard INFI 90 OPEN module mounting unit |
| Ambient temperature | 0 to 70°C (32 to 158°F) |
| Relative humidity | 0-95% up to 55°C, noncondensing; 0-45% at 70°C, noncondensing |
| Altitude | Sea level to 3 km (1.86 miles) |
| Air quality | Noncorrosive; pollution degree I |
| EMC | EN50082-2, EN50081-2 and EN61010-1 when installed in an INFI 90 OPEN cabinet |
| Certification information | CSA; FM listed as pending in the referenced instruction |
| Hazardous-location approval | Nonincendive Class I Division 2, Groups A, B, C, D and Class II Division 2, Groups F, G |
The module is designed for the INFI 90 OPEN architecture. It communicates with a multifunction processor or multifunction controller through the I/O expander bus. The module has a unique I/O address selected by its S1 address switch.
Historical Replacement: The manufacturer instruction explicitly states that IMASO11 can be used as a direct replacement for IMASO01.
IMASO11 is used in INFI 90 OPEN systems to send analog control signals from MFP/MFC modules to field devices.
These faults may affect process control and should be handled by qualified personnel following proper safety procedures.
Each output channel has a closed-loop current/voltage circuit. The module monitors the output feedback and uses the feedback signal for readback through an A/D converter and the I/O expander bus. This allows the MFP to read individual channel feedback values.
At startup, the outputs automatically go to 0 percent, corresponding to 1 VDC or 4 mA. On an error condition, the module uses a configured fixed/default output value.
Related hardware documented for IMASO11 includes:
Amikon supports industrial automation spare-part requirements with:
These models are listed as available inventory only and are not official or compatible replacement models for IMASO11.
|
ABB 07KP90 Communications Module with 24V DC Supply Voltage Compatible with Advant Controller 31
ABB Bailey IEPAS02 AC System Power Module
ABB Bailey NTAO02 Termination Unit
ABB Bailey NTMP01 Multi-Function Processor Termination Unit
ABB DSAI130D 3BSE003127R1 16-bit Resolution Analog Input Board with ±0.05% Accuracy
ABB Bailey NTDI02 Digital I/O Termination Unit
ABB SPBRC400 BRC400 P-HC-BRC-40000000 Harmony Rack Bridge Controller with 2 MB NVRAM
ABB INNPM12 Network Processing Module for Harmony Rack Cnet
ABB Bailey NTCL01 Communication Termination Unit
ABB PM891K01 Processor Unit
