Intuitional Leak Test Apparatus , Economical And Practical Leak Test Equipment

Intuitional Leak Test Apparatus , Economical And Practical Leak Test Equipment

Product size and material:

• External dimension: Approx W 1100×D 650×H 1150 (mm)
• External material: 304 stainless steel
• Internal dimension: Approx φ500×H 800 (mm)
• Internal material: Acrylic

Test principle:

By filling the tank with compressed air and increasing the water surface pressure, the pressure in the water increases synchronously, thereby simulating different water depth environments.

Product structure:

• The test container is made of acrylic material, which is convenient for users to observe and record⁴.
• Built-in high-precision pressure sensor, which can display internal pressure changes synchronously.
• The tank cover is raised and lowered by the cylinder to reduce the operating risk of the test personnel.
• The tank cover is connected with a mechanical safety valve (not controlled by the software). If the set pressure exceeds the set pressure, the safety valve will release the pressure directly to ensure the safety of users.
• Controller: 7-inch touch screen + PLC, using Yuexin self-developed software, which can be switched to multiple languages⁵.
• Protection measures: short circuit protection,overpressure protection.

• If the user needs to provide an external power supply for the sample, we can open a hole in the lid and provide a locking device (wire diameter <15mm).

Standard features:

Installation requirements:

• Aisle: Before the equipment enters the factory, please confirm that the space in the aisle, elevator, laboratory, etc. of the factory area is sufficient for the equipment to pass through.
• Water source: Please prepare clean water source.
• Air source: Please prepare a compressed air source with an output pressure of 0.6-0.8Mpa⁷.
• Power supply: 220V/50HZ, 100w；please check whether it is compatible.
• Site space: ≥W1500×D1400×2200mm

• The room needs to reserve a drain, and the bottom of the machine can be connected to a water pipe for drainage.

Remark:

1 The pictures in this document are for customer reference only, and there may be color differences between the actual model and the pictures.

2 This document only lists some test standards, which does not mean that other test requirements and standards cannot be conducted. Welcome to communicate and discuss with us.

3 The formula of the corresponding relationship between pressure and water depth: P=9.8d (Unit :kPa,m).

4 It is necessary to avoid scratching the inner wall of the container by the sample, as scratches will affect the observation and video effects.

5 At present, only Chinese and English interfaces are supported; if other languages are introduced, the software can be updated remotely.

6 The time unit set by the factory is generally in seconds. If you want to extend the test time, you need to explain in advance.

7 The user needs to prepare an air compressor in advance (recommended gas storage capacity > 60L). If you need us to buy it on your behalf, you need to explain in advance.

8 The photos may not match the actual ones, and are for user reference only.

The detail photo of product:

jar

Tags: Leak Visualization Machine , Leakage Inspection Equipment , Leak Detection Device

Guangzhou Yuexin Testing Equipment Co., Ltd. is a high-tech enterprise specializing in the research and development, design, production, and sales of IP waterproof testing equipment founded in Guangzhou, Guangdong Province, China, in 2013. So far we have provided professional waterproof testing solutions for enterprise customers across various industries for more than 10 years. 

Our products:

Our main products include two vategories, waterproof test series and dustproof test series.  Besides, we also provide non-standard project customization,such as: Car rain test, Energy storage cabiner rain test, Charging pile rain test and so on. These products are widely used in industries such as electronics, machinery, aerospace, automobiles, electrical engineering, pharmaceuticals.