65mn Cold Rolled Carbon Steel Coil DC05 / DC06 CR Sheet Coil

Presentation of the product
Cold in the rollitude aume is produced by cold rotation. Cold bearings are treated by hot dish at room temperature. Also drink the insect also increased the temperature of steel plaston in the processing process, it is always called cold convents. The cold function formed by hot bearings through a continuous cold deformity has poor mechanical properties and a high riggity. Must be taken to restore their mechanical properties. Their name sensing the strong coil without stages. The rolled coil is usually used to make products without bending and elongated.

Product perks
1. Threaded wretched prodies are correct in size, in the uniform slip, and the change of carbolity is not more or less, which can compose high tolerance requirements.
2. It is possible to achieve extremely thin strips that cannot be produced by hot bearings (up to 0.001 mm or less).
3. The quality of the surface of The cold tunes are taller, they are not flaws as the warm sheet of iron, etc., who are often in warm-warm-on-lived on the user's needs. Rough surface, etc. to facilitate the following process process.
4. Fredddy platics was good mechanical properties and higher products (as the highest resistance of the lowest range of the lower traction, etc.).
5 Complete circulation can be carried out with high productivity.

Looking forward to doing business and making friends with clients all around the world.