Mitsubishi Isuzu Engine Parts Okj Parts 6bd1 Cylinder Liner 1 Year Warranty

Mitsubishi Isuzu Engine Parts Okj Parts 6bd1 Cylinder Liner 1 Year Warranty

OKJ Parts 6BD1 Cylinder Liner for Mitsubishi Engine Agriculture Diesel Engine Spare Parts

the piston ring does not work properly:

The opening clearance is too small, so that the piston ring is broken; The gap between heaven and earth is too small, so that the piston ring stuck; Too much carbon makes the piston ring stick in the ring groove and lose elasticity, resulting in fracture or gas leakage.

The leakage of gas destroys the lubricating oil film and causes the surface temperature to be too high. After the piston ring breaks, the debris is easy to fall into the piston cylinder and cause the cylinder to pull and bite.

fuel of inferior quality:

Incomplete combustion leads to more combustion residues; After burning phenomenon is serious, make exhaust temperature rise, did not take timely technical measures; Cylinder lubrication base value is not appropriate.

In addition, some diesel engines due to long-term overload operation, thermal load increase, overheating expansion or moving parts of the poor alignment and cylinder.

Product Description

Common problems

poor cylinder lubrication:

Cylinder lubrication is insufficient or the oil supply is interrupted, and the cylinder is pulled due to direct contact with the metal. The reasons for cylinder lubrication are: too little oil in the sump or the oil quality is too poor, the temperature of the diesel engine is too high, or the piston ring (mainly the oil ring) is damaged or failed.

insufficient running-in:

In order to achieve effective running-in in as short a time as possible, running-in time and load distribution must be taken into consideration. Under too low load, running-in cannot be completed even if it takes a long time, while if the engine is anxious to run under high load, it will cause the cylinder to be drawn. The piston ring shall be operated under low load for a period of time after replacement. After replacing the piston and cylinder jacket, it should be run in and out before increasing the load.

Our Advantages

1. High quality with competitive price

2. We can develop new items for you especially

3. We have more than 15 years in construction machinery parts in oversea market

4. Experience in engine parts for over 15 years and served customers all around the world.

5. We have the professional equipment for inspection and measurement. Each piece should be strictly tested.

FAQ

Q: How can we get our goods?

A: 1. For samples, can be:Fedex, DHL, UPS, EMS

2. For formal orders, can be:By air, by sea, by train

Q: How long will we get our goods?

A: 1. 5-10 days, can be ready for dispatching.

2. 12-20 days, is the maximum for mass production.

Q: How about the quality of products we received?

A: Each of our product has the quality guarantee. According to our clients feedback, the quality problem is not seem to happen for the right use

Our Product Range

Guangzhou Shangshun Engineering Machinery Parts Co., LTD.

Guangzhou Shangshun Engineering Machinery Parts Co., LTD., 14 years specializing in engine spare parts, a total of four subsidiary below: Guangzhou machinery spare parts, Guangzhou baiyikang machinery spare parts, Guangzhou zhongcheng machinery sapre parts , Guangzhou hongying engine maintenance center. The main products are: cylinder liner, piston, piston ring, valve, pipe, seat, bearings, water tank, crankshaft, Chassis spring, etc. They are all made of the host form a complete set of materials,quality are among the best in the industry. Business throughout the country to overseas states. The annual turnover of the company is about RMB 78 million. Now it is the general agent of OKJ heavy industries engine parts in China.

Our mission: Make a living at it, be good at it; High-profile work, low-key life; Customer first, mission will reach!

Our concept: OKJ make maintenance no longer difficult!

Our Trophy And Culture