HI TARGET RTK GPS V90 PLUS GNSS RTK SYSTEM

V90 PLUS GNSS RTK SYSTEM

With a hi-tech, fully integrated design, the conveniently sized V90Plus is one of the most flexible choices for any measuring task. Built-in Linux3.2.0 operating system, pre-loaded multiple smart applications such as tilt surveying, electronic bubble calibration, NFC and voice DIY, V90Plus GNSS system provides surveyor industry-leading GNSS solutions.

Features :

Small and lightweight

· Only weighs 950g.

· Measures Diameter 153mm x Height 83mm.

Multi-constellation Tracking

· 220 tracking channels

· Supports GPS, GLONASS, GALILEO, BDS, SBAS

· NGS approved full-band GNSS antenna

Smart Application

· Offers tilt survey with a maximum tilt angle of 30 degrees.

· Supports electronic bubble calibration

· The internal NFC module makes Bluetooth communication quick and easy.

· Intelligent voice assistance guides field operations. Voice can be DIY.

· Standard Rinex data and HI-TARGET raw data recorded simultaneously.

Optional Transceiver UHF Radio

· The transceiver UHF radio enables switchable working modes between base and rover.

· Three types of internal UHF radio provide different frequencies based on users requirements. The Pacific Crest TrimTalk© internal UHF radio is compatible with other radios.

Multi-network Connection

· Supports GPRS, GSM and WCDMA

· Supports WIFI

Powerful Battery

· Powered by high-capacity (5000mAh) Li-ion battery to ensure full day operation

Rugged Design

· IP67 dustproof and waterproof

· Able to survive a 3-meter natural fall onto concrete

Parameter :

Satellite Signals Tracked Simultaneously
220 Channels
GPS……….. Simultaneous L1C/A, L2C, L2E, L5
GLONASS……………..Simultaneous L1C/A, L1P, L2C/A (GLONASS M only), L2P
SBAS……………………. Simultaneous L1 C/A, L5
Galileo………………... Simultaneous L1 BOC, E5A, E5B, E5AltBOC
BDS………………..…….……………………………. B1, B2
QZSS…………………….. L1 C/A, L1 SAIF, L2C, L5

POSITIONING PERFORMANCE

Static and Fast Static GNSS Surveying
Horizontal……………………2.5mm+0.5ppm RMS
Vertical…………………………. 5mm+0.5ppm RMS

Post Processing Kinematic (PPK / Stop & Go) GNSS Surveying
Horizontal……………………….. 1cm+1ppm RMS
Vertical………………………… 2.5cm+1ppm RMS
Initialization time……….Typically 10 minutes for base while 5 minutes for rover
Initialization reliability……Typically > 99.9%

Real Time Kinematic (RTK) Surveying
Single Baseline
Horizontal……………………….. 8mm+1ppm RMS
Vertical…………………………. 15mm+1ppm RMS

Network RTK
Horizontal……………………….. 8mm+0.5ppm RMS
Vertical………………………….. 15mm+0.5ppm RMS
Initialization time……..…Typically < 8seconds
Initialization reliability…….Typically > 99.9%

Code Differential GNSS Positioning
Horizontal………………………. 25cm+1ppm RMS
Vertical…………………………… 50cm+1ppm RMS
SBAS ……… 0.50m Horizontal, 0.85m Vertical

HARDWARE
Physical
Dimensions (W x H)…….153mm x 83mm (6.02inch x 3.27inch)
Weight………950g (2.09lb) without internal battery
Operating temperature………. -40℃to +65℃ (-40℉ to +149℉)
Storage temperature…………. -40℃ to +75℃(-40℉ to +167℉)
Humidity………………………. 100%, considering
Water/dustproof……………….. IP67 dustproof, protected from temporary immersion to depth of 1m (3.28ft).
Shock and vibration……………Designed to survive a 3m(9.84ft) natural fall onto concrete.

Shanghai Magcach Technology co., LTD is located in Jinshan District Shanghai China ,which has the import and export right . Shanghai Magcach Techonology Co.,Ltd are mainly line in all kinds survey instruments,all kinds Hardware Tools.

The all kinds Survey Instruments include all kinds brands Total Station ,Theodolite ,Auto Level ,GPS ,Laser Distance Sensor ,Laser Distance Meter ,Tripod ,Prism ,Prism Pole,Cable ,Battery ,Charger ,Some parts for the Total Station ,Theodolite,Auto Level ,etc.

Shanghai Magcach Co.has its own factory to research and produce the survey instruments : Total Station ,Theodolite ,Auto Level ,and the survey accessories, and has so many kinds cooperating factories to produce the survey instruments and hardware tools.

By several years developing,the sales network has been spread all over the China and worldwide market . Shanghai Magcach Co.has been established a long -term friendly relationship with many maufacturers in China. Our factory has the ISO9000 certificate and CE certificate. We are focus on the quality of our products and the after sale service . We have our own researching developing department. And we also have our own service and repairing department to test and repair the products.

Now we not only sell our own instruments,but also can supply others famous brand products . we have prepared well to enter into the international market depending on our goods with high quality and competitive price.

We can produce personality products according to the clients requirements. OEM can be done by us for clients ,too.

Most of our products are listed on our website: www.magcachtools.com

We sincerely welcome all distributors from worldwide to cooperate with us .