ISO 7Mpa Piston Grout Pump Low Pressure Grouting Machine Mini Structure

portable mini structure Cement Grouting Machine Price low pressure

Cement Grouting Machine Price

Clutch of Cement Grouting Machine Price:
Cement grouting machine (BWl50 pump) selects the friction clutch of an agricultural tricycle, which has simple structure and convenient operation. It realizes the connection and separation with power by operating the clutch separation handle (the clutch orientation is shown on the nameplate on the host protective cover). When the handle is pushed to the "off" position, the clutch claw is forced to compress the clutch thrust bearing, so that there is no compression force between the active and passive friction plates, and the power is off. After the clutch handle is pushed to the "close" position, the active and passive friction plates are combined under the action of the internal spring force, and the power is connected.

Technical parameters of Cement Grouting Machine Price:

Structure of Cement Grouting Machine Price:

Cement Grouting Machine is mainly composed of pump body, pump frame, air chamber, shock-resistant pressure gauge, motor, V-belt and pulley cover.

The installation foundation of cement grouting pump should be smooth and not inclined.
The pump is fixed on the foundation with the foot screw to prevent the vibration of the pump during operation.

Preparations before pumping of Cement Grouting Machine Price:

After the pump has been stopped or reinstalled for a long time, the following preparations must be made before starting.
1. Check whether there is enough lubricating oil in each part.
2. Check whether the suction pipe of the filter is unblocked.
3. Check whether there is obstruction in the movement of each part.
4. Check the accuracy and reliability of the transmission mechanism.
5. Check the looseness of fasteners, especially the screw tightening of rubber piston locking nut, cross head and piston rod connection thread.
6. Check the suction height of the pump. The maximum suction height of the pump should not exceed 2.5 meters in areas below 1000 meters above sea level. In areas above 1000 meters above sea level, the suction height of the pump should be reduced according to the local atmospheric pressure reduction.
7.Check the position of the filter immersed in the mud tank. Generally, the mud level should be below 0.3-0.5 meters, and the filter should be no less than 0.5 meters away from the bottom of the mud tank.

Pictures of Cement Grouting Machine Price:

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.