....2, 13.3.4 a), and IEC 60065:2014 clause 13.3.4 b), 14.2, IEC60950, etc. Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance. Test sample: Household appliance, Audio, video,

Impulse voltage test generator and monitor ,IEC 60335-1-Clause 14 Impulse test generator 1. Test pulse waveform: 1.2/ 50uS 2.The waveform error is ±20%; 3.The output pulse voltage is 0 ~ 10kV, which can be adjusted continuously； 4.The accuracy of voltage ...

IEC 61851 High Voltage Impulse Test Generator for EV Charging Equipment Complied Standards & Clauses The Impulse Test Generator conforms to the standard requirements of IEC 61851-1 clause 12.7, IEC 61851-23 clause 11.4, etc. Equipments Overview It is used to verify that the appliances shall withstand the transient over-voltages to which they may be subjected. The impulse voltage test is a destructive test in which a breakdown occurs if the test

...test equipment ES-10.pdf 1000kg.f Force Random Vibration Test Equipment For IEC 60335-2-24 And IEC 60335-2-40 high frequency vibration test machine is used to educational, research, and laboratory environments. Adopted the double- magnetic circuit structure, self-generated...

...Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test...

IEC60255-5 Test Equipment Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5％ Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2μs ±30％ Half value of after wave time 50μs ±20％ Capacitance 0.8U Output polarity ...

IEC60255-5 Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5％ Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2μs ±30％ Half value of after wave time 50μs ±20％ Capacitance 0.8U Output polarity Positive, ...

... 14. Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance.Household Appliance Test Equipment. This tester is in line with the requirements of IEC 60335-1 Clause 14, which can

...Test System Comply With IEC-68-2-27 MIL-STD-810F International Standard Product Option Highlights Low frequency Seismic Base to limit the shock energy that transmits to the floor Customized table mounting patterns available Low Impulse Kits to extend low level testing capability Dual Mass Shock Amplifiers to generate extremely high acceleration levels (10,000g+) Hold Down Fixtures for securing test...