-
Needle Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is ...
Needle Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is ... more
Brand Name:Haida
Model Number:6011-HD
Place of Origin:China
-
... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical ...
-
... of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the
-
... Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, ...
-
... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not
... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not more
Brand Name:HJ
Model Number:NF-1
Place of Origin:China
IEC60695-11-5 Needle Flame Tester Flammability Testing Equipment
-
... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The
-
...Needle Flame Tester IEC60695-11-5 Flammability Test Equipment 1. Introduction The needle flame test apparatus is controlled by 7-inch color touch screen and PLC, the system comes with a flame calibration system. The shell is made of painted coating metal sheet and built-in air exhaust. The front panel is transparent for easy observation of the experimental process. The needle-flame tester consists of a dia.0.9mm needle...
...Needle Flame Tester IEC60695-11-5 Flammability Test Equipment 1. Introduction The needle flame test apparatus is controlled by 7-inch color touch screen and PLC, the system comes with a flame calibration system. The shell is made of painted coating metal sheet and built-in air exhaust. The front panel is transparent for easy observation of the experimental process. The needle-flame tester consists of a dia.0.9mm needle... more
Brand Name:PEGO Group
Model Number:NF-1H
Place of Origin:China
IEC60695-11-5 Flammability Test Equipment PLC Type Needle Flame Tester
-
...Needle Flame Tester IEC Table Type By Small Flame IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied in the production and quality control...
...Needle Flame Tester IEC Table Type By Small Flame IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied in the production and quality control... more
Brand Name:KINGPO
Place of Origin:Mainland China
Minimum Order Quantity:1
Φ0.9mm Φ0.5mm Needle Flame Tester IEC Table Type By Small Flame
-
...Needle Flame Tester ---- Model NFT Introduction: NFT Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT Needle Flame Tester...
...Needle Flame Tester ---- Model NFT Introduction: NFT Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT Needle Flame Tester... more
Brand Name:LAB TECH
Model Number:NFT
Place of Origin:China
NFT Needle Flame Tester for Insulating Material Flame Testing
-
... and easy to operate. wide range of parameter adjustment. Apply to the test standards IEC60695,GB5169, etc. Standards: IEC60695; GB5169 Feature 1. Needle Flame Tester: Glass windows 2.
... and easy to operate. wide range of parameter adjustment. Apply to the test standards IEC60695,GB5169, etc. Standards: IEC60695; GB5169 Feature 1. Needle Flame Tester: Glass windows 2. more
Brand Name:GESTER
Model Number:GT-MC35G
Place of Origin:China
Glass Windows LCD Display IEC60695 Needle Flame Tester
-
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester more
Brand Name:Sinuo
Model Number:SN773
Place of Origin:China
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1
-
... products. This machine simulates the small flame generated inside the product under fault conditions, and uses simulation technology to evaluate the fire hazard. Needle height: more than 35mm (inner diameter 0.5, outer diameter 0.9); The gas volume can be
-
220V / AC 50Hz Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appliances, ...
220V / AC 50Hz Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appliances, ... more
Brand Name:SKYLINE
Model Number:SL-7610
Place of Origin:China
IEC 60332-2-2 Flammability Testing Equipment Needle Flame Tester
-
...GB/T5169.5-2008, GB4706.1-2005.. 1. Electrical Needle Flame Tester used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, ...
-
Needle Flame Tester IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle...
Needle Flame Tester IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle... more
Brand Name:YUYANG
Model Number:YYF059
Place of Origin:China
CE Needle Flame Wire Testing Equipments SUS304 Material IEC 60695
-
Liyi IEC60695 Needle Flame Testing Machine Tester Flammability Chamber Product Description Needle flame tester is suitable for lighting, low voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, ...
Liyi IEC60695 Needle Flame Testing Machine Tester Flammability Chamber Product Description Needle flame tester is suitable for lighting, low voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, ... more
Brand Name:Liyi
Place of Origin:Guangdong, China
Certification:CE, ISO
Liyi IEC60695 Needle Flame Testing Machine Tester Flammability Chamber
-
... Needle Flame Combustion Test Chamber IEC 60695-11-5 For Electronic Plastic Needle Flame Combustion Test Chamber Production introduction: Needle Flame Tester is in accordance with standards IEC60695-2-2 and IEC60695-11-5 to design and produce .The tester ...
-
... 4.15.1, IEC60335-1 clause 30.2.3.2, Annex E, clause 13.3, etc. Equipment Overview The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when
... 4.15.1, IEC60335-1 clause 30.2.3.2, Annex E, clause 13.3, etc. Equipment Overview The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when more
Brand Name:Sinuo
Model Number:SN772
Place of Origin:China
IEC 60695-11-5 Flammability Test Equipment Needle Flame Test Chamber
-
Needle flame tester by IEC60695-2-2 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, electrical ...
Needle flame tester by IEC60695-2-2 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, electrical ... more
Brand Name:AI
Model Number:NFT
Place of Origin:CHINA
IEC60695 Needle Flame Test Equipment with Stainless Steel Needle Burner
-
... gas (butane) to ignite the sample at a 45° angle to see if the sample is ignited and burned. And the length of the burn to assess the fire risk of small flames inside the equipment due to