-
...Degree diameter 32mm Tapered Rock button bit for rock drill Product category: DTH taper drill bit Matched connection: 12 degree taper Diameter: 32mm KINGDRILLING DTH taper drill bit description: Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air leg or hand held jack hammer driller in quarrying,and mining. (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit
...Degree diameter 32mm Tapered Rock button bit for rock drill Product category: DTH taper drill bit Matched connection: 12 degree taper Diameter: 32mm KINGDRILLING DTH taper drill bit description: Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air leg or hand held jack hammer driller in quarrying,and mining. (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit more
Brand Name:MING
Model Number:MZ0732-12
Place of Origin:CHINA
-
DHD Series Wholesale Button Bits for Water Hole Deep Drill Hammer Bits Description In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit...
DHD Series Wholesale Button Bits for Water Hole Deep Drill Hammer Bits Description In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit... more
Brand Name:MIROC
Model Number:DHD380
Place of Origin:China
-
DHD350/QL50/MISSION50/SD5 5'' DTH Hammer Bits for Hard Rock Drilling Product Information: The life of the DTH bit depends on the material and technology of the bit. The bit is made of the most efficient high quality alloy steel.Use quality forged ...
DHD350/QL50/MISSION50/SD5 5'' DTH Hammer Bits for Hard Rock Drilling Product Information: The life of the DTH bit depends on the material and technology of the bit. The bit is made of the most efficient high quality alloy steel.Use quality forged ... more
Brand Name:MTH
Model Number:105mm diameter
Place of Origin:CHINA
-
Description: DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance. DTH hammer ...
Description: DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance. DTH hammer ... more
Manufacturing Process:Forging
Material:Alloy Steel
Mining Type:Mining
-
...BOX 114mm drill rods with API 4 1/2" REG PIN 114mm drill rods with API 4 1/2" REG BOX Bits with COP84. DHD380, Mission80, QL80, SD8 shanks Borewell Hammer Application fields: All kinds of fields, such as mining, quarry, tunnel, bridge, construction and etc
...BOX 114mm drill rods with API 4 1/2" REG PIN 114mm drill rods with API 4 1/2" REG BOX Bits with COP84. DHD380, Mission80, QL80, SD8 shanks Borewell Hammer Application fields: All kinds of fields, such as mining, quarry, tunnel, bridge, construction and etc more
Brand Name:ROSCHEN
Model Number:DHD360 6"
Place of Origin:GERMANY
-
... central exhaust impactor. The effect of discharging the rock powder is good, the repeated crushing of the rock slag is reduced, the wear of the drill bit is reduced, the drilling efficiency is
... central exhaust impactor. The effect of discharging the rock powder is good, the repeated crushing of the rock slag is reduced, the wear of the drill bit is reduced, the drilling efficiency is more
Brand Name:New Diamond
Model Number:ND series hammers
Place of Origin:Hunan, China (Mainland)
-
Product description Product introduction: A down-the-hole drill, usually called DTH is mainly a pneumatic powered rock or ground drill, in which the percussive hammer is located directly behind the drill bit, so the percussion mechanism follows the bit dow...
Product description Product introduction: A down-the-hole drill, usually called DTH is mainly a pneumatic powered rock or ground drill, in which the percussive hammer is located directly behind the drill bit, so the percussion mechanism follows the bit dow... more
Brand Name:SOLLROC
Model Number:DHD340
Place of Origin:China
-
...Degree Tapered Button Bits: Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm, 42mm Buttons: 4, 5, 6, 7, 8 Flushing Water Hole Nos.: 1, 2, 3 Skirt: Short, Long David Zhang Liaocheng Jinquan Construction Machinery Co.,Ltd E-mail: sales@jinquandrill.com MSN: rockdrillingtool@hotmail.com Skype: rockdrillingtool Website: 7 degree tapered button bits 7 tungsten carbide buttons for jack hammer...
...Degree Tapered Button Bits: Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm, 42mm Buttons: 4, 5, 6, 7, 8 Flushing Water Hole Nos.: 1, 2, 3 Skirt: Short, Long David Zhang Liaocheng Jinquan Construction Machinery Co.,Ltd E-mail: sales@jinquandrill.com MSN: rockdrillingtool@hotmail.com Skype: rockdrillingtool Website: 7 degree tapered button bits 7 tungsten carbide buttons for jack hammer... more
Brand Name:Jinquan
Model Number:Threaded & Tapered
Place of Origin:China
-
...bits rock drill mahine drill bits, jack hammer bits Button bits degree: 7° 9° 11° 12° Button bits button NO. : 4,5,6,7,8 Body length of bits : 55mm 60mm 65mm Dia of button bits: 24mm~42mm PRODUCT INTRODUCTION Tapered Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our bits...
...bits rock drill mahine drill bits, jack hammer bits Button bits degree: 7° 9° 11° 12° Button bits button NO. : 4,5,6,7,8 Body length of bits : 55mm 60mm 65mm Dia of button bits: 24mm~42mm PRODUCT INTRODUCTION Tapered Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our bits... more
Brand Name:QIDELI
Model Number:H22/H25
Place of Origin:PUTIAN FUJIAN CHINA
-
...Bit 12 degree 11 degree Button Bit Hex 22 Hex 25 For Hammer Rock Drilling Our Tapered drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized tapered button drill bits...
...Bit 12 degree 11 degree Button Bit Hex 22 Hex 25 For Hammer Rock Drilling Our Tapered drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized tapered button drill bits... more
Brand Name:SUVEC
Model Number:tapered drill button bit
Place of Origin:China
-
..., mining, tunnel work and construction. KSQ provides quality tools that withstand the toughest rock drilling demands. Product Description: Our tapered bit and rods come in a variety of taper angles, and we provide tapered rods in a
..., mining, tunnel work and construction. KSQ provides quality tools that withstand the toughest rock drilling demands. Product Description: Our tapered bit and rods come in a variety of taper angles, and we provide tapered rods in a more
Brand Name:MIROC by KSQ
Model Number:BL735-11D-25
Place of Origin:China (Mainland)
-
Small Drill Bit Tapered Chisel Bit 7 degree 12 degree Hex22 28mm 45mm for Mining Feature of the taper Chisel bit: (1)Taper angle: 4°,4°46″,6°,7°,11°,12° (2)Models: chisel/cross/button bit (3)Dia:20-45 mm (4)Button bit shape: spherical/parabolic (5)Socket ...
Small Drill Bit Tapered Chisel Bit 7 degree 12 degree Hex22 28mm 45mm for Mining Feature of the taper Chisel bit: (1)Taper angle: 4°,4°46″,6°,7°,11°,12° (2)Models: chisel/cross/button bit (3)Dia:20-45 mm (4)Button bit shape: spherical/parabolic (5)Socket ... more
Brand Name:OED/OEM
Model Number:7 degree/11°/12°/4°
Place of Origin:China
-
Durable Alloy Steel Threaded Drill Bit , High Effective Rock Hammer Drill Bits T38 The Drill Bits are made from grade hard alloy and special steel, generally matched with the light-duty rock drill. The drill tools are used in metallurgy mine, geological ...
Durable Alloy Steel Threaded Drill Bit , High Effective Rock Hammer Drill Bits T38 The Drill Bits are made from grade hard alloy and special steel, generally matched with the light-duty rock drill. The drill tools are used in metallurgy mine, geological ... more
Brand Name:Super Diamond
Place of Origin:China
Certification:ISO
-
Top hammer rock drill 40mm 7 degrees 4/5 button hard rock drill button bit conical drill bit 1 Product description of Rock Drilling Bits The perfect design, tungsten carbide and skirt steel, provide leading strength and penetration rate to improve ...
Top hammer rock drill 40mm 7 degrees 4/5 button hard rock drill button bit conical drill bit 1 Product description of Rock Drilling Bits The perfect design, tungsten carbide and skirt steel, provide leading strength and penetration rate to improve ... more
Brand Name:HZJX
Model Number:40mm tapered rock button drill bits jack hammer bits
Place of Origin:China
-
Product Description: Introducing our high-quality Rock Drill Bits featuring a Gauge Angle of 35 degrees, designed for optimal performance in various drilling applications. These rock drill bits are specially crafted with exceptional precision and ...
Product Description: Introducing our high-quality Rock Drill Bits featuring a Gauge Angle of 35 degrees, designed for optimal performance in various drilling applications. These rock drill bits are specially crafted with exceptional precision and ... more
Brand Name:Xianfeng
Place of Origin:China
Minimum Order Quantity:1
-
... Bits Diameter From 24mm To 48mm Q8-34-1222-65 specification: Drill bit diameter Ø34mm Length:65mm Carbide Button: 8pcs Button Shape: ballistc Tapered degree:12° Water (flushing) holes: Front 2pcs, side 1pc Suit for air leg or hand jack hammer driller...
... Bits Diameter From 24mm To 48mm Q8-34-1222-65 specification: Drill bit diameter Ø34mm Length:65mm Carbide Button: 8pcs Button Shape: ballistc Tapered degree:12° Water (flushing) holes: Front 2pcs, side 1pc Suit for air leg or hand jack hammer driller... more
Brand Name:OED or OEM
Model Number:Q8-34-1222-65
Place of Origin:China
-
...Borewell Drilling Rig Machine ST 200 Pneumatic Borewell Drilling Machine It is especially suitable for water intake in mountainous and rocky strata.Pneumatic water well drilling machine should be used together with air compressor, it can add mud pump and foam pump. Need to use different drilling tools such as: drill rod, hammer, rock drill bits, etc. ST 200 Pneumatic Borewell...
...Borewell Drilling Rig Machine ST 200 Pneumatic Borewell Drilling Machine It is especially suitable for water intake in mountainous and rocky strata.Pneumatic water well drilling machine should be used together with air compressor, it can add mud pump and foam pump. Need to use different drilling tools such as: drill rod, hammer, rock drill bits, etc. ST 200 Pneumatic Borewell... more
Brand Name:ShiTan
Model Number:ST200
Place of Origin:China
