Home > Filter >

IEC60669-1 Clause 19.3 Electrical Appliance Tester Self Ballast Lamp Load Box 3 Channel

Categories Electrical Appliance Tester
Brand Name: HongCe
Model Number: HK1503
Certification: Third part calibration certificate(cost additional)
Place of Origin: China
MOQ: 1 set
Price: Negotiation
Payment Terms: L/C, T/T
Supply Ability: 10 sets per month
Delivery Time: 30 days
Packaging Details: Plywood
Voltage meter: Range 0 ~ 300V,precision 0.5, digital display
Power meter: 0~9KW, precision 0.5, digital display
Output channel: 3 channel
Standard: IEC60669-1:2017 clause 19.3
Dimension: wide (800mm) * Deep (800mm) * high (1800mm)
Protection time: 1 ~ 99S
  • Product Details
  • Company Profile

IEC60669-1 Clause 19.3 Electrical Appliance Tester Self Ballast Lamp Load Box 3 Channel

IEC60669-1 clause 19.3 Self Ballast Lamp Load Box


Standard


IEC60669-1:2017 clause 19.3


Application


This device is suitable for breaking capacity and normal operation life test to fixed switches for house held and similar purpose, especially suitable for self ballast lamp switch electric stress and thermal stress test when control the LED circuit. To verify whether the switch can withstand normal use, any mechanical damage or electrical fatigue failure under normal operation, any contact adhesion phenomenon or long term closure or disconnection phenomenon, to test whether excessive wear or other harmful consequences.


Test sample


Self Ballast Lamp(SBL) Switches


Feature


Dimension about: wide (800mm) * Deep (800mm) * high (1800mm). The frame is blue and the side panels are light white. Above the front is the operation control panel. On the control there are power switch, product test voltage and power display instruments, alarms, touch screen, etc., there are resistors and capacitor load combinations, AC contactors, relays. There is a terminal under the box, which is connected to the product in the testing machine through the wire, and outputs current and provides load in the inspection process.

The load device has been preset with standard load conditions before shipment. As long as the test voltage is adjusted to 250V~, the operator presses the switch button with the same rated current as the switch to be tested, and its rated power, impulse waveform, Ipeak and I2t meet the corresponding requirements of the standard.

There are 3 stations and 3 switches can be tested at the same time.

With metering mode and metering dedicated port, built-in 90-degree closing plate, easy to measure the output waveform, Ipeak current value and I2t energy value, fully meet the standards for equipment measurement requirements.

The device is equipped with a voltage regulator, which can reach the voltage of 250V required by the switch test without the need of an external voltage regulator.


Parameters:


1. Power supply: single phase AC220V±5%/50Hz, power supply to test sample prepared by user.

2. Voltage meter: Range 0 ~ 300V, precision 0.5, digital display

3. Power meter: 0~9KW, precision 0.5, digital display

4. Output channel: 3 channel

5. Each preset switch rated voltage 250V ~, rated current 10A, 13A, 16A, 20A four optional (can be customized test voltage and Test current).

6. The input voltage is adjustable to ensure that the test voltage is 250V~

7. All operating parameters are set at 250V~, including W, Ipeak, I2t, and inrush current waveforms.

8. Each device provides a closing control device (touch screen select "measurement" function),each time is in the 90 degree angle conduction, this function can be used for initial equipment calibration and measurement verification.

9. With long / long protection function, the protection time of 1 ~ 99S can be preset, shutdown alarm protection.

10. Use environment: temperature 5 ~ 40 °C, relative humidity 20 ~ 90% RH, atmospheric pressure 80 ~ 106kpa. No severe vibration, no electromagnetic interference, no dust, corrosive gas, good heat dissipation.


China IEC60669-1 Clause 19.3 Electrical Appliance Tester Self Ballast Lamp Load Box 3 Channel factory
Send your message to this supplier
 
*From:
*To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly